PlyDeck Pro

PlyDeck Pro

  • specifications
Thicknesses: 6,5; 9; 12; 15; 18; 19; 21; 24; 27; 30 mm
Sizes: 2440х1220х2440, 2500х1250х2500
Grades: I/I, I/II, II/II, III/III
Surface type: F/F (smoth/smoth)
Film density: 220/220 g/m2  
Abrasion behaviour test data from WKI: (Taber test/mean value):

400-450 rounds

The formaldehyde emission according to WKI reports:

(limit value: 3,5 mg/h х m2):

0,1 mg/h х m2

The strenght characteristics

Thickness of plywood, mm

Bending strength, MPa, mean value 

Modulus of Elasticity, MPa, mean value 

perpendicular to the fiber 

parallel to the fiber 

perpendicular to the fiber 
parallel to the fiber 
6,5 60 85 4300 9500
9 65 85 5700 9000
12 60 80 6000 8500
15 60 80 6500 8500
18 75 70 7000 8500
19 70 70 7200 8000
21;24;27;30 70 70 7000 8000

PlyDeck Pro is plywood with both sides covered with film which is made of heightened density paper impregnated with phenol-formaldehyde resin.

This product has higher level of density and resistance to abrasion in comparison with our PlyDeck plywood, having all advantages of the latter.

The surface of film faced plywood resistant to different environmental and chemical conditions, multilayer structure from birch veneer providing exceptional strength make film faced plywood irreplaceable in wear-resistant surfaces production (reusable formwork for concrete construction, bridge building, scaffolding, flooring and sheathing of trucks).

PlyDeck Pro is manufactured on the basis of our birch plywood, i.e. PlyBirch Exterior.

As veneer is covered with film, only the defects of laminating are considered in grading. In addition, defects of wood which are noticeable outside are taken into account. Each side of panel corresponds to one of the following grades: I, II or III.

Water-resistant cover has dark brown color, density 120/220 and 220/220 g/m2.

Edges are sealed with water-resistant acrylic paint.