Non slip plywood, Plyterra manufacturer birch plywood.


Plyterra Antislip
Plyterra Antislip

Plyterra Antislip

  • specifications
Thicknesses: 6,5; 9; 12; 15; 18; 19; 21; 24; 27; 30 mm
Sizes: 2440х1220х2440, 2500х1250х2500
Grades: I/I, I/II, II/II, III/III
Surface type: F/W (wire/smooth)
Film density: 120/120 g/m2 ; 220/220 g/m2
Abrasion behaviour test data from WKI: (Taber test/mean value): 400-450 rounds
The formaldehyde emission according to WKI reports:
(limit value: 3,5 mg/h х m2): 		0,1 mg/h х m2

The strenght characteristics

Thickness of plywood, mm

Bending strength, MPa, mean value

Modulus of Elasticity, MPa, mean value 

perpendicular to the fiber 

parallel to the fiber 

perpendicular to the fiber 

parallel to the fiber 

6,5 60 85 4300 9500
9 65 85 5700 9000
12 60 80 6000 8500
15 60 80 6500 8500
18 75 70 7000 8500
19 70 70 7200 8000
21;24;27;30 70 70 7000 8000

Plyterra Antislip is a special brand for non-slip birch plywood. Both sides of the panel are overlaid with dark brown film which is made of high density paper impregnated with phenol-formaldehyde resin. The slip-proof plywood has one side coated with smooth film and the other side with film having wire mesh surface, that guarantees maximum anti-slip protection.

Smooth and slip-proof surfaces of film faced plywood withstand various weather and chemical conditions, while multi-layer structure of panels provides exceptional strength and makes them irreplaceable for the production of wear-resistant surfaces.

Anti-slip plywood is used for flooring of trailers, vans, railway wagons. In addition to transportation industry, our specific product with non-slip surface is also used for flooring when constructing warehouses, loading platforms, scaffolding, playgrounds. Slip-proof plywood has found its application in shipbuilding for decking of RORO ships.

Plyterra Antislip is manufactured on the basis of our exterior birch plywood, i.e. Plyterra Birch Exterior. Durability, strict thickness tolerances and resistance to banding makes base plywood used for lamination very popular among parquet manufactures.

As a supplier of high-quality anti-slip plywood, Plyterra Group guarantees maximum slip resistance, high wear-resistance (Taber test) and minimum rolling wear (Rolling test) of the material.

As veneer is coated with film, only the defects of laminating are considered in grading. In addition, defects of wood which are noticeable outside are taken into account. Each side of the panel either anti-slip or smooth corresponds to one of the following grades: I, II or III.

Water-resistant coating has dark brown color, density 120/120, 120/220, 220/220 g/m2

Edges of are sealed with water-resistant acrylic paint.

You may contact our managers to buy anti-slip plywood directly from the supplier.


Back to the list