• specifications
  • pictures
6,5; 9; 12; 15; 18; 19; 21; 24; 27; 30 mm
Sizes: 2440х1220х2440, 2500х1250х2500
Grades: I/I, I/II, II/II, III/III
Surface type: F/F (smoth/smoth) 
Film density: 120/120 g/m2 
Abrasion behaviour test data from WKI: (Taber test/mean value):

400-450 rounds

The formaldehyde emission according to WKI reports:(limit value: 3,5 mg/h х m2):

0,1 mg/h х m2

The strenght characteristics

Thickness of plywood, mm

Bending strength, MPa, mean value

Modulus of Elasticity, MPa, mean value 

perpendicular to the fiber 

parallel to the fiber 

perpendicular to the fiber 

parallel to the fiber 

6,5 60 85 4300 9500
9 65 85 5700 9000
12 60 80 6000 8500
15 60 80 6500 8500
18 75 70 7000 8500
19 70 70 7200 8000
21;24;27;30 70 70 7000 8000

Film Faced Birch plywood is plywood with both sides covered with film which is made of paper
impregnated with phenol-formaldehyde resin.

This product has high level of density and resistance to abrasion, good strength properties, the film
on the surface prevents the product from moisture absorption.

The surface of film faced plywood resistant to different environmental and chemical conditions,
multilayer structure from birch veneer providing exceptional strength make film faced plywood
irreplaceable in wear-resistant surfaces production (reusable formwork for concrete construction,
bridge building, scaffolding, flooring and sheathing of trucks).

Film faced plywood of our production is manufactured on the basis of Exterior birch plywood.
As veneer is covered with film, only the defects of laminating are considered in grading. In addition,
defects of wood which are noticeable outside are taken into account. Each side of panel
corresponds to one of the following grades: I, II or III.

Standard water-resistant cover has dark brown color, density 120 g/m2.

Film faced plywood is possible to produce with or without logotype depending on clients’ needs.

 Edges are sealed with water-resistant acrylic paint.